Commercial | Industrial | Residential
Free quotes & advice phone
02 9620 9755
Hours
Mon - Fri  8am - 4:30pm

Soff Cutting

Cutting In provides Soff Cutting services for the Sydney area.

Soff cut concrete cutting is used when expansion cuts are needed within 2 – 8 hours of finishing concrete. This system minimises chipping and random cracking. The concrete cutters can get the job completed on the same day the concrete is finished. It features a low noise system, which allows the system to be used in residential areas with minimal disruption. This system cuts dry with low dust which does not stain coloured concrete.

The Problem
Of the problems facing concrete contractors, random cracking is among the most costly and aggravating. Random cracking is particularly troubling because it immediately casts doubt on concrete quality, leading to owner dissatisfaction, call backs and disputes.

The Solution
Soff-Cut has the only Ultra Early Entry dry-cutting system which controls random cracking through the early timing of the cut. With the Soff-Cut Ultra Early Entry method, control joints are cut within one to two hours during the finishing process and before final set. The control joints are not as deep as the traditional method – as little as 1″ – and the chance of random cracks occurring is minimized.

How it Works
As concrete hydrates and begins to set, it develops internal stresses. The objective in controlling random cracking is to relieve these stresses before they seek their own relief in the form of a random crack. The up-cutting rotation of the blade combines with the patented skid plate by applying pressure to the surface to prevent chipping or spalling.

No job is considered too big or too small. Contact us to discuss your requirements, we’ll be happy to give you a quote.